Skip to main content

Basic Operations

Displaying Fusion Editor

In the initial Scene Composer layout, Fusion appears next to the Scene Editor in the center of the window. If Fusion is not visible, go to View > Fusion > Fusion from the menu bar and check Fusion to display it.

Diagram Display Operations

See Fusion Editor UI for basic operations related to the diagrams displayed within Fusion panel.


Adding a Fusion node

New fusion nodes can be added to any fusion node by the following operations. The added Fusion nodes are connected via links from connectors.

drawing-4-1684910997.png

  • Use a connector
    1. Drag a connector of any Fusion node and move a mouse.
    2. A link will appear following a mouse operation, and release a mouse button anywhere.
    3. he "Select Fusion Node" dialog box will appear, so select Fusion node you need to add.
      drawing-4-1684914138.png

    Fusion Node collapsing and expanding

    Each Fusion Node has an expand/collapse button at the upper right corner. Clicking it will toggle between collapsing and expanding the Fusion node.

    drawing-4-1684914268.png

    Reference Fusion Node

    You can create a reference to behaviors available in the solution. For more information about this operation, see Behaviors: Deep Copy/Paste Operation. A reference icon appears in the upper left corner of the Fusion node corresponding to that reference behavior. This is the same icon that appears for the behavior in the Extra Scenes tree. Click this icon to navigate to the referenced Fusion node.

    drawing-4-1684917750.png

     

    Moving Fusion nodes

    Drag a Fusion node to move it to any location in Fusion panel. If multiple fusion nodes are selected by either of the following operations, all Fusion nodes will be moved.

    • Ctrl-click to select multiple fusion nodes.
    • Selecte multiple Fusion nodes with a rectangular selection after dragging with a mouse left button.

    Copy and Paste a Fusion node

    A Selected Node can be copied by pressing Ctrl + C. A copied Node can be pasted by pressing Ctrl + V. If multiple fusion nodes are selected by either of the following operations, all Fusion nodes will be copied.

    • Ctrl-click to select multiple fusion nodes.
    • Selecte multiple Fusion nodes with a rectangular selection after dragging with a mouse left button.

    Delete a Fusion node

    Fusion nodes can be deleted by selecting a fusion node to be deleted and pressing Delete button on a keyboard. If other Fusion nodes are connected to the selected Fusion node, a link to selected Fusion node is disconnected and a link connection is made with the top node. After this operation, again press Delete button to peform deletion.

    If a connection between Fusion nodes are enabled, you can drag a connector to connect a link to another Fusion node.


    By right-clicking on a connector of Fusion node, delete a link already connected (However, a link of Fusion nodes connected to the top node cannot be deleted.) If a connector is connected to multiple links, all links will be deleted. The Fusion node that deletes its link is then automatically linked to the top node.


    Undo/Redo operation

    Undo/Redo operations can be performed by using the Undo/Redo icon in the toolbar. And, keyboard shortcut keys of Undo/Redo is also supported.

    Back to top