# Traveo2 NoOS BSP: Prerequisites

#### <a class="anchor" id="bkmrk-"></a>Hardware: Infineon Traveo II

CGI Studio has been tested on **Infineon Traveo II (CYTVII-C-2D-6M-500-BGA CPU REV-B) board and Infineon Traveo II (CYTVII-C-2D-4M-216 CPU REV-A) board** .

#### <a class="anchor" id="bkmrk--0"></a>CMake

In order to build Candera, the Meta build system CMake needs to be installed with at least version mentioned <span style="color: rgb(230, 126, 35);">[here](https://doc316en.candera.eu/books/build-system-setup/page/prerequisites)</span>.  
CMake makes it possible to create the cross compilation makefiles that can be used with Green Hills MULTI compiler (or IAR Embedded Workbench for ARM).

#### <a class="anchor" id="bkmrk--1"></a>Generator

To allow cross compilation with makefiles, MinGW 4.2.1 was used for this release.

#### <a class="anchor" id="bkmrk--2"></a>Toolchain

The build tool chain is not part of the delivery.

#### <a class="anchor" id="bkmrk--3"></a>Green Hills

Green Hills MULTI IDE, Green Hills compiler and the corresponding Traveo II graphics driver have to be obtained directly from Green Hills and/or Infineon and should be installed according to their installation guide.   
CGI Studio was tested with **MULTI IDE 7.1.4 (configured as suggested by Infineon - GHS Traveo II Debug Script Environment), Compiler 2017.1.4**   
  
The Green Hills probe 5.6.4 for ARM was used for connection/debug on the target.

#### <a class="anchor" id="bkmrk--4"></a>Embedded Workbench

IAR EW IDE for ARM, compiler and the corresponding Traveo II graphics driver have to be obtained directly from IAR and/or Infineon and should be installed according to their installation guide.   
  
CGI Studio was tested with **IAR EW IDE 8.22.2 (configured as suggested by Infineon), Compiler IAR ANSI C/C++ Compiler 8.22.2.15995/W32 for ARM**   
  
The IAR Systems I-jet probe 2.5.0.0 was used for connection/debug on the target.

#### <a class="anchor" id="bkmrk--5"></a>Infineon Graphics Library

The graphics driver is not part of this release. CGI Studio was integrated and tested with the following versions:

- V1.2.0 for IAR EW
- V2.3.0 for GreenHills

#### <a class="anchor" id="bkmrk--6"></a>Flashing tool

**Infineon Auto Flash Utility 1.2** via MiniProg4 was used in order to flash asset file to the external flash (Hyperflash).